Please generate a paragrpah of Summary to
When we started our Christmas decorating plan for this year, we knew we wanted to go with a Winter Wonderland Glam theme. We come across and feature so many amazing bloggers with their original ideas for Christmas and holiday projects, but we were looking for something this year that would elevate the state-of-the-art look of our fresh home, but still maintain the Christmasy feel that is so essential to us. We came across this project from Chris at ‘Curbly‘, and decided it was just what we were looking for. We took it a hair further and tweaked a few things, but they turned out amazing, and just the right touch of glam with a smidgen of minimal. Here is our uncomplicated step by step tutorial for our state-of-the-art Christmas cone trees!
Modern DIY Christmas Cone Trees
Supplies
- Paper Mache Cones (We used 24 inch, 13 inch and 11 inch)
- Drill and several sizes drill bits
- Lights (Optional, but ok let’s face it, waaayyyyy necessary!) It’s Christmas!)
Step One
One of the first things we decided with this project was that in order to make a huge glam statement, more is more. We chose to make these the focal point of our main living area built ins, and that meant creating a forest of different sized cone trees! We also felt “go substantial, or go home” so we included several 2 foot elevated cone trees from ‘Consumer Crafts‘. One thing we noticed about the cones from this company is that they do have seams, some more than one. However, we couldn’t find the largest size anywhere else, and that was essential to our vision.
Step Two
We started out choosing 3 different sized bits and drilled holes in the cones randomly, putting more towards the bottom, and fewer at the top. Try to make the holes quick and silky and straight in, you get less ragged holes that way. You are drilling into what is essentially paper, so be prepared, it’s not going to look perfect right away. If you are hesitant and try to drill slowly, it will tear up the hole. Also, piercing bits work best!
Step Three
Now the fun part. JK. Using fine sandpaper, sand down the entire outside of the cones, paying special attention to the holes. We used a dremel grinding tool to “immaculate out” the larger holes, and then a petite bit or bamboo skewer to poke through the minuscule holes to the inside. It’s a trial and error thing with the sanding, sand just enough to get the holes looking neat. We opted not to sand the inside, it just pushed torn cone back into the holes we just cleared! We had a theory that if we could just get the holes open and looking good (even if it was ragged looking inside) that once we sprayed the paint, it would all be held into place with the paint as “binding”. (We were right!) This does take awhile if you’re doing a lot like we did, but it’s not as bad as it sounds. Really!
Step Four
Spray paint the cones in airy coats. We chose to operate a flat paint like the original project, because Chris pointed out it made it look like high end ceramic. (It does.) But another good reason to operate flat over gloss, it does a better job at hiding the flaws in the paper mache. You could also spray on a airy glitter coat on last if you wanted a little glitz. Remember folks, coats! Dripping paint here would ruin the high end look!
Step Five (The Easy Step!)
So now all you have to do is airy them! We chose to operate strings of firefly lights on copper wire, but you could operate LED candles or even tap lights! If you operate string lights, we found it helped to tape the lights into the top inside of the cone to keep the whole cone lit. This should go without saying, but do not, repeat, try to put real flame candles or other heat producing lights inside these cones. They are . Got the picture?
That’s it! Easy, fun, and they look AMAZING! (Ok, I had fun… I think Steve might have been cursing the day we became DIY bloggers by the time we got to state-of-the-art Christmas cone tree #10…) Merry Christmas! If you enjoyed this tutorial, try our post on DIY Christmas Cone Trees for other ideas!
,summary should tell what is discussed or gonna be discussed in article and give heading to this section “Introduction”. please dont add any introductory text or any instruction because this introduction paragraph is directly getting published in article i dont want it to look like copy paste or AI generated
When we started our Christmas decorating plan for this year, we knew we wanted to go with a Winter Wonderland Glam theme. We come across and feature so many amazing bloggers with their original ideas for Christmas and holiday projects, but we were looking for something this year that would elevate the state-of-the-art look of our fresh home, but still maintain the Christmasy feel that is so essential to us. We came across this project from Chris at ‘Curbly‘, and decided it was just what we were looking for. We took it a hair further and tweaked a few things, but they turned out amazing, and just the right touch of glam with a smidgen of minimal. Here is our uncomplicated step by step tutorial for our state-of-the-art Christmas cone trees!
Modern DIY Christmas Cone Trees
Supplies
- Paper Mache Cones (We used 24 inch, 13 inch and 11 inch)
- Drill and several sizes drill bits
- Lights (Optional, but ok let’s face it, waaayyyyy necessary!) It’s Christmas!)
Step One
One of the first things we decided with this project was that in order to make a huge glam statement, more is more. We chose to make these the focal point of our main living area built ins, and that meant creating a forest of different sized cone trees! We also felt “go substantial, or go home” so we included several 2 foot elevated cone trees from ‘Consumer Crafts‘. One thing we noticed about the cones from this company is that they do have seams, some more than one. However, we couldn’t find the largest size anywhere else, and that was essential to our vision.
Step Two
We started out choosing 3 different sized bits and drilled holes in the cones randomly, putting more towards the bottom, and fewer at the top. Try to make the holes quick and silky and straight in, you get less ragged holes that way. You are drilling into what is essentially paper, so be prepared, it’s not going to look perfect right away. If you are hesitant and try to drill slowly, it will tear up the hole. Also, piercing bits work best!
Step Three
Now the fun part. JK. Using fine sandpaper, sand down the entire outside of the cones, paying special attention to the holes. We used a dremel grinding tool to “immaculate out” the larger holes, and then a petite bit or bamboo skewer to poke through the minuscule holes to the inside. It’s a trial and error thing with the sanding, sand just enough to get the holes looking neat. We opted not to sand the inside, it just pushed torn cone back into the holes we just cleared! We had a theory that if we could just get the holes open and looking good (even if it was ragged looking inside) that once we sprayed the paint, it would all be held into place with the paint as “binding”. (We were right!) This does take awhile if you’re doing a lot like we did, but it’s not as bad as it sounds. Really!
Step Four
Spray paint the cones in airy coats. We chose to operate a flat paint like the original project, because Chris pointed out it made it look like high end ceramic. (It does.) But another good reason to operate flat over gloss, it does a better job at hiding the flaws in the paper mache. You could also spray on a airy glitter coat on last if you wanted a little glitz. Remember folks, coats! Dripping paint here would ruin the high end look!
Step Five (The Easy Step!)
So now all you have to do is airy them! We chose to operate strings of firefly lights on copper wire, but you could operate LED candles or even tap lights! If you operate string lights, we found it helped to tape the lights into the top inside of the cone to keep the whole cone lit. This should go without saying, but do not, repeat, try to put real flame candles or other heat producing lights inside these cones. They are . Got the picture?
That’s it! Easy, fun, and they look AMAZING! (Ok, I had fun… I think Steve might have been cursing the day we became DIY bloggers by the time we got to state-of-the-art Christmas cone tree #10…) Merry Christmas! If you enjoyed this tutorial, try our post on DIY Christmas Cone Trees for other ideas!
please generate atleast 4 “FAQs” using
When we started our Christmas decorating plan for this year, we knew we wanted to go with a Winter Wonderland Glam theme. We come across and feature so many amazing bloggers with their original ideas for Christmas and holiday projects, but we were looking for something this year that would elevate the state-of-the-art look of our fresh home, but still maintain the Christmasy feel that is so essential to us. We came across this project from Chris at ‘Curbly‘, and decided it was just what we were looking for. We took it a hair further and tweaked a few things, but they turned out amazing, and just the right touch of glam with a smidgen of minimal. Here is our uncomplicated step by step tutorial for our state-of-the-art Christmas cone trees!
Modern DIY Christmas Cone Trees
Supplies
- Paper Mache Cones (We used 24 inch, 13 inch and 11 inch)
- Drill and several sizes drill bits
- Lights (Optional, but ok let’s face it, waaayyyyy necessary!) It’s Christmas!)
Step One
One of the first things we decided with this project was that in order to make a huge glam statement, more is more. We chose to make these the focal point of our main living area built ins, and that meant creating a forest of different sized cone trees! We also felt “go substantial, or go home” so we included several 2 foot elevated cone trees from ‘Consumer Crafts‘. One thing we noticed about the cones from this company is that they do have seams, some more than one. However, we couldn’t find the largest size anywhere else, and that was essential to our vision.
Step Two
We started out choosing 3 different sized bits and drilled holes in the cones randomly, putting more towards the bottom, and fewer at the top. Try to make the holes quick and silky and straight in, you get less ragged holes that way. You are drilling into what is essentially paper, so be prepared, it’s not going to look perfect right away. If you are hesitant and try to drill slowly, it will tear up the hole. Also, piercing bits work best!
Step Three
Now the fun part. JK. Using fine sandpaper, sand down the entire outside of the cones, paying special attention to the holes. We used a dremel grinding tool to “immaculate out” the larger holes, and then a petite bit or bamboo skewer to poke through the minuscule holes to the inside. It’s a trial and error thing with the sanding, sand just enough to get the holes looking neat. We opted not to sand the inside, it just pushed torn cone back into the holes we just cleared! We had a theory that if we could just get the holes open and looking good (even if it was ragged looking inside) that once we sprayed the paint, it would all be held into place with the paint as “binding”. (We were right!) This does take awhile if you’re doing a lot like we did, but it’s not as bad as it sounds. Really!
Step Four
Spray paint the cones in airy coats. We chose to operate a flat paint like the original project, because Chris pointed out it made it look like high end ceramic. (It does.) But another good reason to operate flat over gloss, it does a better job at hiding the flaws in the paper mache. You could also spray on a airy glitter coat on last if you wanted a little glitz. Remember folks, coats! Dripping paint here would ruin the high end look!
Step Five (The Easy Step!)
So now all you have to do is airy them! We chose to operate strings of firefly lights on copper wire, but you could operate LED candles or even tap lights! If you operate string lights, we found it helped to tape the lights into the top inside of the cone to keep the whole cone lit. This should go without saying, but do not, repeat, try to put real flame candles or other heat producing lights inside these cones. They are . Got the picture?
That’s it! Easy, fun, and they look AMAZING! (Ok, I had fun… I think Steve might have been cursing the day we became DIY bloggers by the time we got to state-of-the-art Christmas cone tree #10…) Merry Christmas! If you enjoyed this tutorial, try our post on DIY Christmas Cone Trees for other ideas!
. Please only return “FAQ” section in result.please dont add any introductory text.
-
WLCXDZVR Print Canvas Wall Art William Morris Exhibition Print William Morris Poster Vintage Wall Art Textiles Art Fox Contemporary Living Room Bedroom Office Modern Art Decor 16x24in Unframed
$20.00 Buy Now -
Sale!
TideAndTales 3D Beach Wall Art – Seashell Decor with Starfish for Beach Bathroom Decor, Ocean Inspired Beach Decor for Bathroom, Coastal Bedroom, Living Room or Beach House, Set of 3 (6”x 6”)
Original price was: $37.99.$25.99Current price is: $25.99. Buy Now -
VICTOR & TERESA Ceramic Vase for Flowers, 9.5” Set of 2 Decorative Vintage Blue Vases for Home Decor, Farmhouse Vases for Pampas Grass, Table, Mantel, Living Room, Shelf, Centerpieces, Gifts for Mom
$29.99 Buy Now
